DIY 24x14 Shed with Porch Plans: Wine Barrel Storage Blueprint PDF

DIY 24x14 shed with porch plans for an all-wood cedar shiplap shed with a 4 ft covered porch, glazed carriage doors and a wine barrel stillage. Instant PDF download.

- Product: Vintner 24x14 Porch Shed, DIY shed with porch plans
- Format: Digital PDF download
- Pages: 56
- Paper Size: US Letter
- Units: Imperial
- Dimensions: 24' x 14' floor frame including the porch; enclosed room 24' x 10' (240 sq ft, inside 281" x 113") behind a 48" deep covered porch; the entry step adds 12-1/2" in front
- Height: About 13' 5" above the ground at the porch eave, about 8' 1" at the back eave
- Roof: Single-slope (shed roof) at 4/12 pitch, high over the porch, 2x8 rafters at 24" on center, 1x6 tongue-and-groove deck, 16" red cedar shingles
- Porch: Three 6x6 cedar posts, a 4x8 beam, four 4x4 knee braces, 5/4x6 cedar decking, cedar railings at both ends, a built-in bench and a 96" wide entry step
- Doors and Windows: A pair of glazed cedar carriage doors over a 72" x 81" opening, two 36" x 40-1/2" six-lite windows
- Walls and Siding: 2x4 framing at 16" on center, solid fir headers, housewrap, horizontal 1x8 cedar shiplap oiled natural, charcoal casings and corner boards
- Floor: 2x6 pressure-treated joists at 16" on center with solid 2x6 tongue-and-groove pine planks inside, no plywood
- Built-ins: A barrel stillage for three barrels along the back wall and three levels of 96" crate shelves on the right wall
- Foundation: 20 concrete blocks on a compacted gravel pad with 4x6 pressure-treated skids and 4 earth anchors
- Style: Wine-country cottage
- Skill Level: Intermediate, 2 to 3 people, about 9 weekends
- Includes: 20 illustrated steps, shopping list, master cut list, cut diagrams, cutting templates, elevations, floor plan, 7 finished renderings
- Best For: Home winemakers, wine barrel and crate storage, vineyards, backyard storage with a sitting porch
- Delivery: Instant PDF download after purchase, no physical item shipped

## What's Included in This 24x14 Shed with Porch Plan

This shed with porch plan takes you from the gravel pad to the barrel stillage and crate shelves in 20 illustrated steps. Every step has a 3D drawing with the new parts highlighted, short numbered instructions and a check to finish the step.

- Overview and specifications with a section through the shed
- Front, side and back elevations plus a dimensioned floor plan
- Before you start: tools, actual lumber sizes, fasteners and roof angles
- Shopping list for lumber, cedar shiplap, shingles, trim and hardware
- Master cut list in build order, with a Part ID for every piece
- Cut diagrams for lumber and sheet goods, plus cutting templates
- Finishing, yearly care and troubleshooting notes
- Seven computer renderings of the finished shed

## A 4 ft Covered Porch with Cedar Posts, Railings and a Bench

The 48" deep porch runs the full 24 ft width under the high end of the roof. Three 6x6 cedar posts, a 4x8 beam and knee braces carry the roof, with cedar railings at both ends, a built-in bench and a 96" wide entry step. The porch decking is 5/4x6 cedar.

## Wine Barrel Stillage and Crate Shelves Inside

Along the back wall, a barrel stillage holds three wine barrels on cedar rails and chocks. The right wall has three levels of 96" shelves for crates and bottles. The windows face the porch, so the sun does not reach the barrels.

## Cedar Shiplap, Glazed Carriage Doors and a Cedar Shingle Roof

Horizontal cedar shiplap is oiled natural, with charcoal casings, corner boards and fascia. A pair of glazed cedar carriage doors and two six-lite windows open onto the porch. The single-slope roof is covered with red cedar shingles. The plan uses no plywood: the floor is 2x6 tongue-and-groove planks and the roof deck is 1x6 tongue-and-groove boards.

The framing is sized for about 30 psf roof snow. In heavier snow areas, have a local professional check the beam, headers and rafters.

## File Format, Paper Size and Units

The plan is a 56-page PDF on US Letter paper with imperial measurements, with lengths given in actual inches to 1/16". You can print it or read it on a tablet or computer.

## Who These DIY Shed with Porch Plans Are For

These DIY shed with porch plans suit builders with intermediate skills who can use a circular saw, miter saw and drill. Raising the 24 ft walls, setting the porch beam and rafters, the roof work and hanging the doors need helpers, and the front wall is best raised by three people.

## How to Use the Shed with Porch Plan PDF

1. Buy the plan and download the PDF.
2. Print it or open it on your tablet or computer.
3. Take the shopping list to your lumber yard.
4. Cut the parts from the master cut list and label each one with its Part ID.
5. Follow the 20 steps in order to build your shed with porch.

## Digital Product Notice

This is a digital product. No physical item is shipped. The PDF is available to download right after purchase.

## License and Terms of Use

You may build as many sheds as you like for your own property. Sharing, reselling or redistributing the PDF or its drawings is not allowed. Check local building codes, permits, setbacks and height limits before you build.

## Frequently Asked Questions

### How do you build a shed with a porch?

In this shed with porch plan, the floor frame and porch frame are built together on the skids, then the walls go up and the porch posts, beam and knee braces carry the front of the roof. The 20 steps cover every stage, from the gravel pad to the porch railings and bench.

### Can this shed be used for wine barrel storage?

Yes, the barrel stillage along the back wall holds three wine barrels, and the crate shelves hold crates and bottles. The plan suggests storing full barrels bung up and keeping the room shaded.

### How many 2x4s do I need for a 14x24 shed?

This 14x24 shed needs 48 stud-grade 2x4s, 6 pressure-treated 2x4s and 3 rough cedar 2x4s in 8 to 16 ft lengths, as listed on the shopping list.

### Do I need a permit for a 14x24 shed with a porch?

At 336 sq ft with the porch included, this 14x24 shed with porch needs a permit in most places. Check your local zoning, setbacks and height limits before you build, since the shed is about 13' 5" tall at the porch eave.

### How do I download the PDF after purchase?

You can download the PDF right after purchase from the download link on your order confirmation page and in your confirmation email. Nothing is shipped, and you can save the file to print or read on any device.

## More Building Plans from KRMPLANS

Browse the KRMPLANS store for more shed plans, pergola plans, garage plans and other DIY building plans. If you have a question about this shed with porch plan, contact us and we will be happy to help.