DIY Stone Outdoor Bar Plans: 15x8 Cedar Shake Roof, Rustic Patio PDF

DIY stone outdoor bar plans for a 15x8 patio bar with faux stacked stone walls, a cedar shake roof, sliding shutters and seats for five. A 37-page PDF guide for home builders.

- Product: Stone Harbor 15x8 rustic lean-to outdoor bar building plan
- Format: Digital PDF download
- Pages: 37
- Paper Size: US Letter (print at 100%)
- Units: Imperial (feet-inches), with metric cut lengths for reference
- Dimensions: 15' x 8' between posts, roof about 16' 4-1/2" x 12' 4-3/4", bar top 42" high
- Style: Rustic lean-to bar with faux stacked-stone bar walls, charcoal T1-11 siding, cedar trim, an espresso-stained timber frame and a 4/12 cedar shake roof
- Skill Level: Intermediate (2 people, about 3-4 weekends)
- Includes: Elevations, floor plan, shopping list, master cut list, cut diagrams, rafter and knee brace templates, post notch, bar top and back wall templates, 18 illustrated steps, 7 renderings
- Best For: DIY builders with an existing concrete patio or slab at least 4" thick
- Delivery: Instant PDF download after purchase, no physical item shipped

## What's Included in This Stone Outdoor Bar Plan

This covered outdoor bar plan takes you from the post bases to the last shelf in 18 illustrated steps. New parts are shown in color in every step, and each step ends with its own cut list.

- Overview and specifications page with all key heights
- Front, side and back elevations plus a floor plan
- Shopping list for lumber, stone panels, siding, cedar shakes, hardware and finishes (67 boards)
- Master cut list with 126 parts, each with a Part ID and metric length
- Cut diagrams showing how to cut every board with minimal waste
- Templates for the rafter, knee brace, post notches, bar top and back wall
- Stain, stone care and shake roof care advice
- Seven computer renderings of the finished bar (stools, drinks, torches, palms, loungers, string lights and the patio are decoration only)

## Outdoor Bar with Cedar Shake Roof: Frame and Dimensions

Six 6x6 pressure-treated posts stand on standoff bases anchored to a concrete slab or patio. A doubled 2x10 front beam and a doubled 2x8 back beam sit in notches at the post tops and are through-bolted, with four knee braces. Thirteen 2x6 rafters at 16" on center carry 1/2" plywood, underlayment and 18" cedar shakes on a single-slope 4/12 roof, giving 9' 2-3/4" of headroom under the front beam.

### Stacked Stone Bar and Back Bar

- 15' 3-1/8" 2x12 bar top at 42", 6" past the stone, seats 5
- Front and right bar walls clad with faux stacked-stone panels over plywood
- 47-3/4" side ledge on the right
- Free-standing 11 ft back counter and four back-bar shelves
- 38-1/2" bartender entry at the right rear

### Window with Sliding Shutters

The full-height left wall has a 30" x 24" window with cedar trim and two shutter leaves on a sliding barn-door track, so the bar can also serve a lounge or fire-pit area. The left and back walls are 5/8" T1-11 siding painted charcoal with cedar corner boards.

## Who This DIY Outdoor Bar Plan Is For

This plan suits builders with intermediate skills who have a concrete patio and can use a circular saw, miter saw and drill. A helper is needed for the posts, beams and roof. If there is no slab, the plan explains how to set the posts on concrete piers instead. Interest in outdoor bars peaks in spring, so the off-season is a good time to plan the build and price materials.

## How to Use Your Outdoor Bar Plans PDF

1. Buy the plan and download the PDF right away.
2. Open it on a tablet or computer, or print it on US Letter paper at 100%.
3. Check local zoning and HOA rules for roofed structures.
4. Buy materials from the shopping list and cut parts from the cut list and diagrams.
5. Follow the 18 steps in order, labeling each part with its Part ID.

## Digital Product Notice

This is a digital download. No physical item is shipped. The PDF is available instantly after purchase.

## Terms of Use

This plan is for personal use. You may build as many bars as you like for yourself, but you may not resell, share or publish the PDF or its drawings.

## Frequently Asked Questions

### How do I download the PDF after purchase?

After checkout you get a download link on the order page and by email, so you can download the stone outdoor bar plan PDF instantly.

### What is a good height for an outdoor bar?

A good outdoor bar height is 42", which is the bar top height in this plan, with the top running 6" past the stone for knee room.

### Can I use real stone on this stone outdoor bar?

You can, but thin natural stone veneer needs cement board, lath and mortar and weighs much more; the faux stone panels in this plan give the same look in a weekend.

### Can I use shingles or metal instead of cedar shakes?

Yes, shingles or metal panels can go over the same plywood and underlayment instead of cedar shakes, and asphalt shingles also need at least a 4/12 pitch.

### Can I build this outdoor bar without a concrete slab?

Yes, you can build this outdoor bar without a slab by pouring six 12" concrete piers below the frost line, setting the post bases in the wet concrete and laying pavers or gravel inside.

## More Building Plans from KRMPLANS

Browse the KRMPLANS store for more DIY building plans, including our other outdoor bar plans, pavilions and pergolas. Have a question about this stone outdoor bar plan? Send us a message and we will be happy to help.